Kettle s/s

Specifications:
(VDE & BS version) 220-240V, 50-60Hz, 2600-3100W
(CH version) 220-240V, 50-60Hz, 2000-2400W
(VDE & BS version)
Boiling time from 15°C to 95°C until 230V:
1.0L: within 2mins 45s (the time subject to final sample)
Boiling time from 95°C to cut off until 230V:
1.0L: within 23s (the time subject to final sample)
(CH version)
Boiling time from 15°C to 95°C until 230V:
1.0L: TBA (the time subject to final sample)
Boiling time from 95°C to cut off until 230V:
1.0L: TBA (the time subject to final sample)
Power cord:
(VDE & BS version) Type: H05VV-F 3G x 1.0mm²
(CH version) Type: H03VV-F 3G x 0.75mm²
Exposed length: ca. 75 cm without plug(VDE & BS version)
Exposed length: ca. 75 cm without plug(CH version)
Brand: Unirise, Ming Tak or NTC or any power cord can meet E-Bench requirement
(if the power cord cannot pass toxic and VDE test, the factory need to change to capable
Supplier without cost up) (can only use one supplier per order)
Features:
Stainless steel kettle with water gauge at handle (Silkscreen marking (0.5L/1.0L/1.5/1.7L MAX))
(For conbimation A) Stainless steel kettle with brushed finish
(For conbimation B) Stainless steel kettle with sprayed glossy metallic red color (1 layer spraying)
Power on/off switch with manual off fuction and white indication light inside (on/off symbol
integrated into the switch)
Lid release button on the handle
Plastic lid with stainless steel decorative plate
360° Otter cordless connector
Auto off when boiling finish and kettle taken out from the base
Boil dry protection and overheat protection
Concealed heating element
detachable filter with nylon mesh near the spout
Base with cord winder with only one outlet and stainless steel ring
Spout with brush finishing and spot welding <- same finishing as Rp -105263
Stainless steel ring and plate on base and lid with brush finishing
3 Pcs anti slip feet at the bottom of base